← 返回搜索

7.7 COPY, CLEAR, AND PASTE

7. INTERACTING WITH THE SYNTAKT > 7.7 COPY, CLEAR, AND PASTE · PDF 第 23–24 · OS 1.40A

# 7.7 COPY, CLEAR, AND PASTE

7. INTERACTING WITH THE SYNTAKT
Likewise, the group consisting of the five [PARAMETER] keys have radio button functionality.
The [FUNC], [TRK], [PTN], and [BANK] keys are always used in combination with other keys.
7.5 PARAMETER EDITING
The DATA ENTRY knobs are used to change the values of the track parameters. The positions of the pa­
rameters on the screen correspond to the physical locations of the knobs on the front panel. Some of the
parameters on the screen tell you what DATA ENTRY knob controls that particular parameter.
For example “(E)”.
7.5.1 EDITING THE TRACK PARAMETERS
First select a track for editing, press and hold [TRK] key and then press one of the [TRIG 1–12] keys.
Then use the [PARAMETER] keys to open the parameter pages tor the selected track.
Use the DATA ENTRY knobs A-H to edit the corresponding parameters. Press and turn a knob to adjust
its parameter in larger increments. Press and hold a [PARAMETER] key to see the values for all param­
eters on that page. For more information, please see “10. AUDIO TRACK PARAMETERS” on page 50,
and “11. MIDI TRACK PARAMETERS” on page 58.
•	 The parameters are adjusted in larger increments if you press down the DATA ENTRY
knob while turning it. This makes it quicker to sweep through the whole parameter
range.
•	 Press DATA ENTRY knob + [NO] to reset the parameter to the default value.
•	 Press [PARAMETER] key + [PLAY] to reset all the parameters in the selected parame­
ter page to default values.
•	 Press and hold a [PARAMETER] key to see the values for all parameters on that page.
7.5.2 PARAMETER VALUE JUMP
Pressing [FUNC] while editing certain parameters will make the parameter values jump to appropriate
positions. The TUNE parameter, for example, jumps full octaves (12 semitones).
7.5.3 CONTROL ALL
If you press and hold [TRK] and change a parameter setting, this change will affect this parameter in all
the audio tracks in the pattern. Press [NO] before you release [TRK] to revert the parameter changes.
The control all functionality is not available for the MIDI tracks or the FX track.
7.5.4 [FUNC] KEY PRESS COMBINATIONS
The standard way to use the [FUNC] key in combination with other keys, is to press and hold [FUNC]
and then make a short press on the second key in the combination. For some key combinations, it is also
possible to access a sub-menu by pressing and holding [FUNC] + second key for a second.
7.6 QUICK SCROLLING
Scroll through menus using the LEVEL/DATA knob. Quick scrolling is possible on many menus. Press
[FUNC] + the [UP] or [DOWN] keys to move the cursor one menu page.
7.7 COPY, CLEAR, AND PASTE
Copy, clear and paste commands are available in a lot of contexts. Pressing [FUNC] + [RECORD] to copy.
Press [FUNC] + [STOP] to paste. Press [FUNC] + [PLAY] to clear. Paste and clear operations is undone by
repeating the key press combination. Please see the different sections in the manual for more information
on when these commands are available.
The copy clipboard can only hold one item at a time. When you perform a copy command,
the item copied replaces any earlier copied items. For example, you can not have both a
trig and a pattern copied at the same time.

7. INTERACTING WITH THE SYNTAKT
7.8 THE NAMING SCREEN
The naming method is identical for the various naming situations that appear when you save sounds and
projects et cetera.
The [LEFT] and [RIGHT] arrow keys are used to navigate between the characters. Turning the LEVEL/
DATA knob or pressing the [UP] or [DOWN] arrow keys selects the characters. [FUNC] + [NO] erases
characters. [FUNC] + [YES] inserts space. Press [SETTINGS] to create a random name. Press and hold
[FUNC] to access the Pop-up Naming menu.
7.8.1 POP-UP NAMING
A convenient way of naming is to open a pop-up menu that shows all available letters, symbols, and
digits. Press and hold the [FUNC] key when you are on the NAMING screen to access the Pop-up
Naming screen.
Keep [FUNC] pressed and use the [ARROW] keys to highlight the character you want to insert. Once
there, release [FUNC] to add the character.
Copy, paste, and clear commands are available on the NAMING screen.
7.9 KEYBOARD MODE
Press [FUNC] + [TRK] (short press) to enter KEYBOARD mode. In this mode, you can use the [TRIG] keys
play the sound of the active audio track (or send MIDI notes if is has a MIDI machine assigned) in a number
of selectable scales. With KB SCALE set to CHROMATIC and KB FOLD set to OFF the [TRIG] keys will
light up in a pattern that resembles an octave of a piano keyboard layout. Only lit keys are playable. Press
[TRK] + [TRIG 1–12] keys to select the track you want to play.
Press the trig keys to change the note pitch of the sound. The full range you can trig for audio track with
Digital voice types spans 10 octaves: middle, 4 up and 5 down. The full range you can trig for audio track
with Analog Drum and Analog Cymbal voice types spans 8 octaves: middle, 2 up and 5 down. The full range
for MIDI tracks spans ten octaves. Press the [ARROW] keys [UP] or [DOWN], to transpose the virtual key­
board up or down in octave steps.
Notes trigged in KEYBOARD mode can be recorded on the sequencer in LIVE RECORDING mode. For
more information, please see “9.3.3 LIVE RECORDING MODE” on page 38.
Press [FUNC] + [TRK] to exit KEYBOARD mode.
7.9.1 KEYBOARD SETUP MENU
Press [FUNC] + [TRK] (long press) to open the KEYBOARD SETUP menu. Here you get a graphical
view of which notes the [TRIG] keys play. Press [UP]/[DOWN] to transpose the keyboard up or down an
octave. In this menu, you can also set different musical scales, and select the root note of the scale. Use
the DATA ENTRY knobs to change the settings. Press [NO] to exit the menu. Press [FUNC] + [TRK] to
exit KEYBOARD mode. The settings are stored in the active pattern.

章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。