← 返回搜索

8.6 THE SOUND MENU

8. PATTERNS AND SOUNDS > 8.6 THE SOUND MENU · PDF 第 30–36 · OS 1.40A

# 8.6 THE SOUND MENU

8. PATTERNS AND SOUNDS
Adjust the overall volume level of the active audio track with the LEVEL/DATA knob.
Edit a sound by adjusting the parameters found on the PARAMETER pages. Access these pages by
pressing a [PARAMETER] page key. Use the DATA ENTRY knobs A-H to change the parameters. For more
information, please see “10. AUDIO TRACK PARAMETERS” on page 50.
The complete sound, with all its parameter settings may be copied to another track. Press [TRK] + [RE­
CORD], and then press [TRK] + one of the [TRIG] keys to select the track you want to copy the sound to,
and finally press [TRK] + [STOP] to paste the sound to the selected track.
8.4 LOADING A SOUND
To load a sound, use the SOUND BROWSER or the SOUND MANAGER. For more information, please see
“8.6.2 SOUND BROWSER” on page 33 and “8.6.3 SOUND MANAGER” on page 33.
8.5 SAVING A SOUND
After you edited the parameters of a sound, you can save it to the +Drive.
1.	 Press [FUNC] + [SONG MODE] to open the MANAGE menu.
2.	 Select SAVE SOUND, and then press [YES].
3.	 Turn the LEVEL/DATA knob or use the [UP]/[DOWN] keys to select an empty slot to where you want
to save your sound, and then press [YES]. If you want to save your sound to another bank, press
[BANK] + [TRIG 9–16] to select a bank.
4.	 On the NAMING screen, name your sound and then press [YES]. For more information, please see
“7.8 THE NAMING SCREEN” on page 24.
5.	 On the TAGS screen, use the [ARROW] keys and [YES] key to select the appropriate tags for your
sound, and then select <SAVE> and press [YES].
8.6 THE SOUND MENU
Press [FUNC] + [SONG MODE] to open the SOUND menu. Here you can set a number of Sound related
parameters. Use the [UP] and [DOWN] arrow keys to move between the options. Press [YES] to confirm
your selection. Press [NO] to exit the menu.
8.6.1 SETUP
Here you can set a number of Sound related parameters. Use the [UP] and [DOWN] arrow keys to move
between the options. Press [YES] to confirm your selection. Press [NO] to exit the menu.
FILTER KEYTRACK
Sets how much the filter opens and closes in relation to what note is played.
VELOCITY TO VOL
Selects how MIDI velocity affects volume when playing the sound from a MIDI keyboard.

8. PATTERNS AND SOUNDS
OFF means velocity does not affect the volume of the sound.
LOG applies a logarithmic velocity curve. The volume difference are greater between softer key­
board presses than between harder.
LIN applies a linear velocity curve. The volume difference between keyboard presses corresponds
linearly to the force applied.
EXP applies an exponential velocity curve. The volume difference are greater between harder key­
board presses than between softer.
PITCH BEND DEPTH
Sets how much the pitch bend data from external MIDI devices affects the Syntakt.
OCTAVE
Sets the base octave of the sound. It also makes sound locking more practical since you can control
the octave setting on the sound and minimize the need to transpose the sequencer notes to make two
or more sounds work together.
LEGATO
In LEGATO mode, the envelopes are not triggered by a subsequent note on/key press if the first note
is still held.
NOTE PRIORITY
Here you can set the note priority, i.e., what note is played if more than one note is played at the same
time. This setting is only available If LEGATO is set to ON.
LAST gives priority to the last note played.
LOW gives priority to the lowest note played.
HIGH gives priority to the highest note played.
PORTAMENTO
Here you find settings related to the portamento. For more information, please see “10.2 TRIG PA­
RAMETERS PAGE 1” on page 50.
SLOPE
CONSTANT RATE. The pitch glides linearly at a constant rate. Longer glides take longer time to
complete.
CONSTANT TIME The pitch glides linearly, but the glide is completed in a specific time, regardless
of the interval between the start and end notes. Glides over wider note intervals, therefore, have a
higher rate.
AMOUNT
This setting enables partial glides where just the final part of the interval is included in the glide. For
example, a setting of 100 gives a full glide from start to finish. Lower values start the glide closer to
the goal pitch. With polyphonic portamento on chords, this results in a shorter and less messy glide.
STYLE
GLIDE Ordinary continuous portamento.
GLISSANDO Quantizes the portamento to semitones.
LEGATO ONLY
ON When playing notes, the pitch glides from the pitch of the last note played and held (the key
pressed down and not yet released) to the pitch of the next new note played on the track.
OFF When you play notes, the pitch glides from the pitch of the last note played to the next new
note played on the track.
• GATING
OFF The glide continues after the key is released.
ON The glide stops when the key is released.
KEY TRACKING
Opens a menu where you can assign up to four parameters to the key tracking. Both the NOTE
parameter on the TRIG menu and the note information from incoming MIDI sent to the Syntakt from
external devices affects the assigned parameters. Press [YES] to open the menu.

8. PATTERNS AND SOUNDS
You can select parameters from the SYN, FLTR, AMP, and LFO PARAMETER pages. Turn the DATA
ENTRY knobs A–D to select the track parameters that you wish to assign. Press [YES] to confirm the
selection. Then use DATA ENTRY knobs E–H  to set the modulation depth of the four track parame­
ters. The depth is an offset of the original track parameter value.
Turn LEVEL/DATA to test your settings.
For key tracking, all modulation are centered around middle C (C5). A positive modula­
tion value increases the parameter value when playing above C5 and decreases when
you play a key below C5. A negative modulation value inverts this behavior.
For example: With a modulation value set to 8, each consecutive note changes the pa­
rameter value by 1. With a modulation value set to 127, each consecutive note changes
the parameter value by 16, meaning that you reach the full parameter rage in 8 notes
PITCH BEND
Opens a menu where you can assign up to four PARAMETER page parameters to the pitch bend. The
pitch bend from incoming MIDI sent to the Syntakt from external devices affects the assigned param­
eters. Press [YES] to open the menu. Selecting parameters and setting modulation depth works in the
same way as for KEY TRACKING.
VELOCITY MOD
Opens a menu where you can assign up to four PARAMETER page parameters to the velocity pa­
rameter. Both the VEL parameter on the TRIG menu and the velocity of incoming MIDI notes sent to
the Syntakt from external devices affects the assigned parameters. Press [YES] to open the menu.
Selecting parameters and setting modulation depth works in the same way as for KEY TRACKING.
Turn LEVEL/DATA to test your settings.
MOD WHEEL
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI mod wheel
command (CC #1). Press [YES] to open the menu. Selecting parameters and setting modulation depth
works in the same way as for KEY TRACKING.
Turn LEVEL/DATA to test your settings.
BREATH CONTROLLER
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI breath
controller command (CC #2). Press [YES] to open the menu. Selecting parameters and setting modu­
lation depth works in the same way as for KEY TRACKING.
Turn LEVEL/DATA to test your settings.
AFTERTOUCH
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI aftertouch
command. Press [YES] to open the menu. Selecting parameters and setting modulation depth works
in the same way as for KEY TRACKING.
Turn LEVEL/DATA to test your settings.

8. PATTERNS AND SOUNDS
8.6.2 SOUND BROWSER
The SOUND BROWSER is used to preview and load sounds. You can also press [FUNC] + LEVEL/DATA
to open the SOUND BROWSER. This menu will show a list of all sounds in the +Drive sound library that
can be loaded to the active track. Scroll the list by turning the LEVEL/DATA knob or by pressing [UP]/
[DOWN]. Press [TRIG 9–16] to select sound bank A–H.  Press [FUNC] + [YES] to preview the sound be­
fore you load it to the track. You can also use KEYBOARD mode, or an external MIDI controller, sending
MIDI on the Syntakt’s Auto channel to preview the sound. Press [YES] to load the sound to the track.
Press [LEFT] to access the SORTING menu. Press [YES] to execute the commands. Press [NO] or the
[RIGHT] arrow key to exit the menu.
VIEW POOL lists sounds available in the Sound pool of the active project. The command is only available
when you browse the +Drive sound library.
VIEW +DRIVE lists sounds available on the +Drive sound library. The command is only available when you
browse the Sound pool of the active project.
SORT ABC sorts the sounds in alphabetical order. The command is only available when sounds are
sorted by slot number.
SORT 123 sorts the sounds by slot number. The command is only available when sounds are sorted
alphabetically.
FILTER opens a list where sounds can be arranged according to tags. Select and deselect tags by
pressing [YES]. Multiple tags can be selected. Exit the tag list by pressing [NO].
SEARCH will perform a text search and list all sounds with names matching or including the text input.
For more information, please see “7.8 THE NAMING SCREEN” on page 24 on how to enter text.
8.6.3 SOUND MANAGER
The SOUND MANAGER is used to manage sounds, for example import, export, rename, and tag sounds.
Opening this menu will show a list of all sounds found in the +Drive sound library. Turn the LEVEL/DATA
knob or press [UP]/[DOWN] to scroll through the list. Press [BANK] and then press [TRIG 9–16] to
select sound bank A–H.  Press [FUNC] + [YES] to preview the sound before you load it to the track. You
can also use KEYBOARD mode, or an external MIDI controller, sending MIDI on the Syntakt’s Auto chan­
nel to preview the sound.

8. PATTERNS AND SOUNDS
Press [LEFT] to access the SORTING menu. Press [YES] to execute the commands. Press [NO] or the
[RIGHT] arrow key to exit the menu.
VIEW POOL lists sounds available in the Sound pool of the active project. The command is only avail­
able when you browse the +Drive sound library.
VIEW +DRIVE lists sounds available on the +Drive sound library. The command is only available when
you browse the Sound pool of the active project.
SORT ABC sorts the sounds in alphabetical order. The command is only available when sounds are
being sorted by slot number.
FILTER opens a list where sounds can be arranged according to tags. Select and deselect tags by
pressing [YES]. You can select multiple tags. Exit the tag list by pressing [NO].
SEARCH will perform a text search and list all sounds with names matching or including the text input.
For more information, please see “7.8 THE NAMING SCREEN” on page 24 on how to enter text.
Press [RIGHT] to access the SOUND OPERATIONS menu. The available operations will affect the
highlighted sound. Press [YES] to apply the commands to the selected sound. Press [NO] or the
[LEFT] arrow key to exit the menu.
LOAD TO TRACK loads the selected sound to the active track and makes it a part of the active pattern.
COPY TO... Copies the selected sounds to one of the following:
• SOUND POOL copies the selected sounds to the first free slots of the Sound pool.
• +DRIVE copies the selected sounds to the first free slots of the +Drive sound library.
• +BANK (A-H) copies the selected sounds to the first free slots of a specific bank inside the
+Drive.
SAVE TO HERE exports the active track sound and saves it to the selected slot.
RENAME Opens a screen where you can rename the selected sound.
EDIT TAGS opens a menu where sounds can be tagged. sounds can have any number of tags, but
only the first two will show on the sound list. Press [YES] to apply or remove tags. Highlight <SAVE>
and press [YES] to save
DELETE deletes the sound or selected sounds.
SELECT ALL selects all sounds in the list.
DESELECT ALL deselects all sounds in the list.
TOGGLE enables or disables write protection for the selected sounds. When a sound is write pro­
tected it cannot be overwritten, renamed, tagged or deleted. A write protected sound has a padlock
symbol next to its name. The command is only available when you browse the +Drive sound library.
SEND SYSEX sends the selected sounds as SysEx data.

8. PATTERNS AND SOUNDS
•	 Sounds in the +Drive sound library are organized into eight banks, ranging from A to
H. Each bank can contain 256 sounds. Use the [TRIG A–H] keys to view only sounds
located in a specific bank.
•	 You can preview the currently selected sound by pressing [FUNC] + [YES]. All sounds
available for the active track can be previewed. Please note that if the previewed sound
is sent to the effects, the current effects settings will affect it.
•	 Several sounds can be simultaneously affected by the commands available in the
SOUND OPERATIONS menu. Select/deselect individual sounds by highlighting them
and pressing [YES].
•	 Press [FUNC] + [UP]/[DOWN] for faster scrolling in the sound list.
8.6.4 LOAD SOUND
Loads (copies) a sound from the +Drive to the active pattern. Turn the LEVEL/DATA knob or press [UP]/
[DOWN] to scroll through the list. Press [YES] to select a sound and then press [TRACK 1–8] to select
the track to where you want to assign the sound.
8.6.5 SAVE SOUND
Saves the active track’s sound to the +Drive. Turn the LEVEL/DATA knob or press [UP]/[DOWN] to
choose a destination memory slot. Press [YES] to export the sound. Name the sound and press [YES]
again to confirm the export.
8.6.7 RENAME TRACK SOUND
Opens the NAMING menu where you can rename the active track’s sound.
8.6.8 INIT TRACK SOUND
Sets the PARAMETER page parameters of the active track to their default values. When selecting this
option, a prompt will appear. Press [YES] to initialize the parameters or [NO] to cancel the operation.
Note that no saved parameter information are permanently lost until the sound is saved to the same slot
it was loaded from.

9. THE SEQUENCER
9. THE SEQUENCER
The sequencer of the Syntakt stores information in patterns. A pattern controls the playback of the audio/
MIDI tracks, the FX track, and various pattern-specific aspects of the tracks. Each of the eight banks, A
to H, contains 16 patterns, which means 128 patterns are available for each project. For more information,
please see “14.3 PATTERN” on page 73.
A pattern contains:
•	 General trig settings on the TRIG page (default note pitch, velocity et cetera).
•	 The parameter settings on the SYN, FLTR, AMP, and LFO pages.
•	 The settings on the DELAY, REVERB, and MIXER pages.
•	 The parameter settings on the FX track.
•	 Quantization settings.
•	 Note trigs and Lock trigs for all tracks.
•	 Parameter/sound locks.
•	 Length and time signature for the tracks.
9.1 SEQUENCER TEMPO
To change the BPM setting, open the TEMPO menu by pressing the [TEMPO] key. Use the LEVEL/DATA
knob to change tempo. Pressing the knob while turning it changes the tempo four BPM at a time. The
[ARROW] keys [UP] or [DOWN] change the tempo in increments of 0.1 BPM. Note that you can chose
between a global tempo or using a separate tempo for every pattern. Press [FUNC] + [YES] to switch
between GLOBAL and PATTERN tempo mode. On the main interface screen, you can also press and hold
[ARROW] keys [LEFT] or [RIGHT] to nudge the tempo 10% up or down temporarily. Release the key to
revert to the original tempo.
To tap a tempo setting, hold the [FUNCTION] key and tap the [TEMPO] key in a steady rhythm. After four
consecutive taps the average tempo of the taps will be calculated. By continuing tapping, the average tem­
po will keep on updating.
When in the TEMPO menu (and with GLOBAL tempo mode selected), holding [FUNC] while turning the
LEVEL/DATA knob will not change the tempo to the selected value until the [FUNC] key is released. While
doing this, “PREP.” will flash in the bottom left corner of the screen.
Nudging the tempo is very handy when manually syncing Syntakt to a turntable or an
external sound source. Note that you do not need to be in the TEMPO menu to perform
tempo nudging.
9.2 BASIC PATTERN OPERATIONS
Syntakt can seamlessly switch between patterns. This, together with the ability to chain patterns, is a handy
feature when improvising live. For more information, please see “9.11 CHAINS” on page 46.
9.2.1 SELECTING BANK AND PATTERN
Press [PTN] and then use the [LEFT]/[RIGHT] keys to select a bank (if you want to select a pattern
from another bank than the current). Then press [TRIG 1–16] to select a pattern.
There is a secondary way to change bank and pattern, more similar to earlier Elektron devices.
Press [BANK] and then press [TRIG 9–16] to select a bank. Then press [TRIG 1–16] to select a pattern.
Press [PTN] and then press [TRIG 1–16] to select a new pattern in the current bank. .
White [TRIG] keys indicate pattern positions that contain data. A red [TRIG] key indicates the current
active pattern. Empty patterns are unlit.
When a pattern is playing, and a new pattern is selected, the new pattern position will be shown flashing

章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。