11. MIDI TRACK PARAMETERS
11. MIDI TRACK PARAMETERS · PDF 第 58 · OS 1.40A
# 11. MIDI TRACK PARAMETERS 11. MIDI TRACK PARAMETERS 11. MIDI TRACK PARAMETERS Here follows a description of the parameters that are on the MIDI tracks PARAMETER pages. The MIDI tracks parameters are saved together with the pattern. The parameters may be locked to other settings on any step of the pattern by first pressing and holding a [TRIG] key, then changing the parameters settings with the DATA ENTRY knobs. For more information, please see “9.10.1 PARAMETER LOCKS” on page 43. To use a track as a MIDI track, you must first assign a MIDI machine to it. 1. Press [FUNC] + [SYN] to open the MACHINE menu. Use the [UP] and [DOWN] keys to navigate to the MIDI machine. 2. Press YES, to select the MIDI machine and assign it to the active track. 11.1 EDITING THE MIDI TRACK PARAMETERS There are five PARAMETER pages for the MIDI tracks. Press the [PARAMETER] keys to access the MIDI tracks PARAMETER pages. Use the DATA ENTRY knobs A-H to change the parameters. Press and hold a [PARAMETER] key to see the values for all parameters on that page. 11.2 TRIG PARAMETERS PAGE Set the actions for when a note is trigged. Change settings using the DATA ENTRY knobs. These general settings affect note trigs placed in the sequencer. Press [TRIG PARAMETERS] to access this parameter page. 11.2.1 NOT1 Note 1 sets the root note that should be sent by the MIDI track. (C0–G10) 11.2.2 NOT2–NOT4 Note 2–4 will add more notes, offset from the root note by the selected values, to a note trig. This makes it possible for a MIDI track to send out chords that consists of up to 4 notes. If the root note is changed the offset notes will transpose accordingly. A value of 0 will remove the offset note. 11.2.3 VEL Trig Velocity controls the velocity of the notes the MIDI track sends out. A setting of 0 equals a NOTE OFF command. 11.2.4 LEN Trig Length sets the duration of the notes. When a note has finished playing a NOTE OFF command will be sent. The INF setting equals infinite note length. 11.2.5 PROB Trig Probability sets the probability that the trigs on the track plays or not. The probability outcome is re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the track plays every time. This parameter changes temporarily to display and control COND (Trig Condition) when you add a condi tional lock. For more information, please see “9.10.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page 44. If you have placed a conditional lock on a trig in the sequencer, the trig condition overrides the Trig Probability setting. For example, if you set PROB to 70% and a FILL trig condition on a trig, that trig will only (and always) play when the Syntakt is in FILL mode. For more information, please see “9.10.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page 44.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。