14.5 SYSEX DUMP
14. SETTINGS MENU > 14.5 SYSEX DUMP · PDF 第 77–78 · OS 1.40A
# 14.5 SYSEX DUMP 14. SETTINGS MENU TRIG KEY DEST controls whether the [TRIG] keys sends MIDI data or not. When set to INT, the [TRIG] keys only affects the Syntakt and no MIDI data is sent. When set to INT + EXT, the [TRIG] keys affects the Syntakt, and also sends MIDI data to external devices. When set to EXT, the [TRIG] keys do not affect the Syntakt but MIDI data is sent externally. MUTE DEST controls whether activating/deactivating mutes will send MIDI data or not. When set to INT, mute only affects the Syntakt and no MIDI data is sent. When set to INT + EXT, mute affects the Syntakt and also send MIDI data to external devices. When set to EXT, mute sends MIDI data externally, but do not affect the Syntakt. RECEIVE NOTES will, when active, make it possible to play Syntakt using an external MIDI keyboard. RECEIVE CC/NRPN will, when active make it possible to control Syntakt parameters from an external MIDI device sending CC/NRPN data. 14.4.3 CHANNELS This menu handles the MIDI channel configuration. TRACK 1–12 selects the dedicated MIDI channel that is used to receive or send (by turning the knobs) parameter data to or from a specific audio/MIDI track. If configured as OFF, parameter data are nei ther received nor sent via MIDI. FX CONTROL CH selects the dedicated MIDI channel that is used to receive or send (by turning the knobs) parameter data to or from the FX track and the DELAY and REVERB parameter pages. If con figured as OFF, parameter data are neither received nor sent via MIDI. The sequencer data is always sent on the MIDI channel specified by the CHAN parameter on the SYN PARAMETER page if the track has a MIDI machine assigned. AUTO CHANNEL selects the MIDI channel that will give access to the currently active track. If an ex ternal MIDI keyboard connected to Syntakt sends MIDI data on this channel, the keyboard will control the active track. This is useful when for example quickly changing between the active audio tracks to play different sounds. The Syntakt also uses the AUTO channel to record to the MIDI tracks from external MIDI controllers. PROGRAM CHG IN CH selects the MIDI channel that will listen for incoming program change mes sages. An AUTO setting will use the AUTO channel. Enable Syntakt to respond to program change messages in the MIDI SYNC menu. For more information, please see “14.4.1 SYNC” on page 75. PROGRAM CHG OUT CH selects the MIDI channel that will send program change messages when changing patterns. An AUTO setting will use the AUTO channel. Enable Syntakt to send program change messages in the MIDI SYNC. For more information, please see “14.4.1 SYNC” on page 75. 14.5 SYSEX DUMP In the SYSEX DUMP menu, project, pattern, and sound data can be sent and received via the MIDI OUT port or the USB port of the Syntakt. Select a menu option using [UP]/[DOWN] or the TRACK LEVEL knob. Press [YES] to open the highlighted menu selection. 14. SETTINGS MENU When receiving or sending SysEx data, the MIDI ports or the USB port of the Syntakt should be connected to the external sending/receiving device. If the Syntakt is sending or receiving SysEx data through the MIDI ports, use the Elektron TM-1 USB MIDI interface for up to 10x transfer speeds. 14.5.1 SYSEX SEND Here projects, patterns, and sounds can be sent to an external device. The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the TRACK LEVEL knob to navigate in the column. The SysEx data send alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the TRACK LEVEL knob to select what will be sent. Press [YES] to initiate the SysEx send procedure. PROJECT will send the active project (settings, patterns, sounds in the sound Pool). PATTERN will send the selected pattern. • Backing up your data regularly is important! • Before initiating a SysEx send, first, make sure the receiving device is listening for data to be sent. 14.5.2 SYSEX RECEIVE Here projects, patterns, and sounds can be received from an external device. Syntakt is continuously listening for SysEx data so you can at any time send backed up projects or patterns to the device. The column to the left selects what will be received. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the TRACK LEVEL knob to navigate in the column. The SysEx data receive lo cations in the column on the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the TRACK LEVEL knob to select what will be received. Press [YES] to initiate the SysEx receive procedure. The Syntakt starts listening to incoming data. Press [NO] to stop listening. PATTERN will store a received pattern to the selected pattern slot. SOUNDS will store a received sound to the selected slot of the +Drive sound library. The option ANYWHERE will place the sound in the first free slot available. To the right of the bank indication, the amount of free slots can be seen. 14.6 AUDIO ROUTING (GLOBAL) Here you find number of audio routing options that affects the Syntakt on a global level. You can also set the audio routing on a pattern level. For more information, please see “14.3.5 AUDIO ROUTING (PATTERN)” on page 74.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。