17. USEFUL KEY COMBINATIONS
17. USEFUL KEY COMBINATIONS · PDF 第 87–89 · OS 1.40A
# 17. USEFUL KEY COMBINATIONS 17. USEFUL KEY COMBINATIONS 17. USEFUL KEY COMBINATIONS Use the key combinations below to quickly perform certain tasks. GENERAL [FUNC] + [REC] performs a copy command. Action depends on the currently active page or mode. [FUNC] + [PLAY] performs a clear command. Action depends on the currently active page or mode. [FUNC] + [STOP] performs a paste command. Action depends on the content that was copied. Press and hold [TRK] and change a parameter setting, then this change will affect this parameter in all the audio tracks in the pattern. TRACK/PATTERN/BANK SELECT [TRK] + [TRIG 1–12] keys to select a track. [PTN] + [TRIG 1–16] keys to select a pattern. [BANK] + [TRIG 9–16] keys to select a bank. NAMING [FUNC] + [ARROW] (on the NAMING screen) to choose a letter. [FUNC] + [NO] (on the NAMING screen) to erase a letter. SAVING AND RELOADING [FUNC] + [SETTINGS] saves the active Project. [FUNC] + [YES] temporary saves the active Pattern. [FUNC] + [NO] temporary reloads the active Pattern. [PARAMETER] key + [NO] reloads all parameters on that parameter page from its last saved state. [TRK] + [TRIG 1–12] + [NO] reloads the sound from its last saved state. [TRIG] + [SONG MODE] save the sound of a trig as a Sound, taking all parameter locks in consideration. MENU ACCESS [FUNC] + [SONG MODE] opens the SOUND SETTINGS menu. [FUNC] + [FX] opens the ANALOG FX BLOCK ROUTING menu. [FUNC] + [TRIG] opens the QUANTIZE menu. [FUNC] + [SYN] opens the MACHINE menu. Press [SYN] twice rapidly to open the MACHINE menu. [FUNC] + [FLTR] opens the DELAY menu. [FUNC] + [AMP] opens the REVERB menu. [FUNC] + [LFO] opens the MIXER menu. [FUNC] + [PTN] (long press) opens the METRONOME menu. [FUNC] + [PAGE] opens the pattern/track SCALE menu. [FUNC] + [TRK] (long press) opens the KEYBOARD SETUP menu. [FUNC] + [UP]/[DOWN] opens the MODIFIER SETUP menu. SEQUENCER [FUNC] + [TEMPO] to tap tempo. [FUNC] + [PTN] (short press) switches the metronome ON/OFF. [LEFT/RIGHT] to nudge tempo (when sequencer is playing). [FUNC] + [LEFT/RIGHT] moves all trigs a whole step, left or right (when in GRID RECORDING mode). [TRIG] key (hold) + [UP/DOWN], opens the RETRIG menu and turns retrig on and sets the retrig RATE for the trig (when in GRID RECORDING mode). 17. USEFUL KEY COMBINATIONS [TRIG] key (hold) + [LEFT/RIGHT], opens the MICRO TIMING menu and sets the micro timing for the trig (when in GRID RECORDING mode). [FUNC] + [UP]/[DOWN] (In the SCALE menu) sets the TRACK LENGTH in musical increments from 2/16 to 64/64. [FX] + [YES] manually triggers the FX track.. SEQUENCER RECORDING [RECORD] + [PLAY] starts LIVE RECORDING. [RECORD] + [STOP] activates STEP RECORDING. [RECORD] + double-press [PLAY] activates/deactivates QUANTIZE LIVE RECORDING. [FUNC] + [PTN] (long press) toggles the metronome on/off. MUTES [FUNC] + [TRIG] keys mutes/unmutes one or several tracks. MODES [FUNC] + [BANK] enters GLOBAL MUTE mode. [FUNC] + double-press [BANK] enters PATTERN MUTE mode. [FUNC] + [TRK] (short press) enters/exits KEYBOARD mode. [YES] + [PAGE] activates FILL mode for one pattern cycle. Press and hold [PAGE] to activate FILL Mode for as long as [PAGE] is held. Press and hold [PAGE] + [YES], and then release [PAGE] before you release [YES] to latch FILL mode. Press [PAGE] again to unlatch FILL mode. CLEAR TRACK/CLEAR PATTERN [FUNC] + [PLAY] (while in GRID RECORDING mode) clears active track. [FUNC] + [PLAY] (while in no mode or LIVE RECORDING mode) clears pattern. RESET PARAMETERS Press DATA ENTRY knob + [NO] to reset the parameter to the default value. [PARAMETER] key + [PLAY] to reset all the parameters in the selected parameter page to default values. RANDOMIZE PARAMETERS Press [PARAMETER] key + [YES] to randomize the parameters on that page. SOUND/TRIG PREVIEW [FUNC] + [YES] (In the SOUND BROWSER/SOUND MANAGER) previews the highlighted sound. [TRIG] + [YES] (In GRID- and STEP RECORDING mode) previews the selected trig. SONG MODE [SONG MODE] + [YES] to enter/exit SONG mode. [SONG MODE] + [UP] to open the SONG menu. [SONG MODE] + [DOWN] to open the LOAD SONG screen. [SONG MODE] + [LEFT] (when in SONG mode) to loop (or stop looing) the currently playing row. [SONG MODE] + [RIGHT] (when in SONG mode) to open the SONG EDIT screen. Press [SONG MODE] (when in SONG mode) twice to open the SONG EDIT screen. [FUNC] + [RECORD] (when in the SONG EDIT screen) copies the selected row. [FUNC] + [STOP] (when in the SONG EDIT screen) pastes a previously copied row to the selected row. [FUNC] + [PLAY] (when in the SONG EDIT screen) resets the selected row to the pattern’s default BPM, length, and mute state. [FUNC] + [UP] (when in the SONG EDIT screen) deletes the selected row. 18. TECHNICAL INFORMATION 18. TECHNICAL INFORMATION ELECTRICAL SPECIFICATIONS Impedance balanced audio outputs Main outputs level: +15 dBu Output impedance: 440 Ω unbalanced Headphones output Headphones out level: +15 dBu Output impedance: 36 Ω Audio inputs Input level: +15 dBu Audio input impedance: 11 kΩ Unit power consumption: 12 W typical Recommended power supply: PSU-3c, 12 V DC, 2A HARDWARE 128 × 64 pixel OLED screen MIDI In/Out/Thru with DIN Sync out 2 × 1/4” impedance balanced audio out jacks 2 × 1/4” audio in jacks 1 × 1/4” stereo headphone jack 48 kHz, 24-bit D/A and A/D converters Electrically isolated hi-speed USB 2.0 port Power inlet: Center positive 5.5 × 2.5 mm barrel jack, 12 V DC, 2A PHYSICAL SPECIFICATIONS Sturdy steel casing Dimensions: W 215 × D 176 × H 63 mm (8.5” × 6.9” × 2.5”) (including knobs and feet) Weight: approximately 1.53 kg (3.37 lbs) 100 × 100 mm VESA mounting holes. Use M4 screws with a max length of 7 mm. Maximum recommended ambient operating temperature: +35˚C (+96˚F)
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。