A.2 SRC MACHINES

勘误Shelf-gain tables lose their minus signs

The Grainer (p. 92) and Shape (p. 96) LO.G/HI.G value tables print “64 = highpass/lowpass filter response, 32 = -12 dB, 16 = -6 dB, 0 = no attenuation or gain, 32 = +6 dB, 63 = +12 dB”. The attenuating rows lost their minus signs in print — 32 appears twice with opposite meanings and 64 exceeds the knob's 63 maximum. The knob is bipolar -64…63, so those rows are -64 (full shelf → filter response), -32 and -16; verified against the rasterized PDF pages.

判定依据：AUDIT.md + §A.2

勘误“VFAD” is used for the parameter named RVEL

The bus, send-FX and mix TRIG pages — and the MIDI machine's TRIG PAGE 1 in §A.2.7 — head the parameter RVEL but close its description with “the effects of the VFAD setting”. VFAD is a leftover name from an earlier draft; the audio-track wording in §12.2 says RVEL throughout, and no VFAD parameter exists on Tonverk.

判定依据：AUDIT.md + §13.2

勘误MIDI tracks: FX LFOs or voice LFOs?

Appendix B's MIDI TRACKS list names every LFO destination “FX LFO1: … (available for FX LFO2)”, but §A.2.7 says a MIDI track's MOD pages “are the same as for audio tracks”, whose MOD pages 1–2 are the voice LFOs of §12.12/§12.13. The mod-destination map leaves those MIDI rows unlinked rather than guess which LFO family they address; unresolved pending hardware.

判定依据：TONVERK_PLAN.md + §A.2.7