APPENDIX B: LFO/MOD ENVELOPE MODULATION DESTINATIONS
APPENDIX B: LFO/MOD ENVELOPE MODULATION DESTINATIONS · PDF 第 115–119 · OS 1.4.1
勘误MIDI tracks: FX LFOs or voice LFOs?
Appendix B's MIDI TRACKS list names every LFO destination “FX LFO1: … (available for FX LFO2)”, but §A.2.7 says a MIDI track's MOD pages “are the same as for audio tracks”, whose MOD pages 1–2 are the voice LFOs of §12.12/§12.13. The mod-destination map leaves those MIDI rows unlinked rather than guess which LFO family they address; unresolved pending hardware.
判定依据：TONVERK_PLAN.md + §A.2.7
勘误FLTR page 2 knob letters are never printed and do not line up
§12.6 describes the six FLTR page 2 parameters (DEL, SPRD, KEY.T, BASE, WIDTH, RSET) without stating any knob letters, while Appendix B lists FILTER page 2 destinations on knobs A, C, D, E, F and H — skipping B and G. The join cannot be made without guessing, so the parameter records number the slots A–F in the manual's listing order and the mod-destination map leaves the “knob H” row unlinked (fltr2.sprd therefore shows no mod-destination badge). Unresolved pending hardware.
判定依据：TONVERK_PLAN.md + §12.6
印刷版手册中已确认的错误。本项目记录矛盾之处，而不是隐藏它们——与所有引用原文的内容一样，下面的说明保持英文。
The following are the modulation destinations for Tonverk’s LFOs and Modulation envelope. The Voice LFOs and Modulation envelope modulate parameters on all parameter pages except the FX pages..The FX LFOs only modulate parameters on the track’s FX parameter pages.
AUDIO TRACKS
META: None
LFO1: Speed (available for LFO2/Mod Env)
LFO1: Multiplier (available for LFO2/Mod Env)
LFO1: Fade In/Out (available for LFO2/Mod Env)
LFO1: Waveform (available for LFO2/Mod Env)
LFO1: Start Phase (available for LFO2/Mod Env)
LFO1: Trig Mode (available for LFO2/Mod Env)
LFO1: Depth (available for LFO2/Mod Env)
LFO2: Speed (available for Mod Env)
LFO2: Multiplier (available for Mod Env)
LFO2: Fade In/Out (available for Mod Env)
LFO2: Waveform (available for Mod Env)
LFO2: Start Phase (available for Mod Env)
LFO2: Trig Mode (available for Mod Env)
LFO2: Depth (available for Mod Env)
SRC page 1: Data entry knob A (machine dependent.)
SRC page 1: Data entry knob B (machine dependent)
SRC page 1: Data entry knob C (machine dependent)
SRC page 1: Data entry knob D (machine dependent)
SRC page 1: Data entry knob E (machine dependent)
SRC page 1: Data entry knob F (machine dependent)
SRC page 1: Data entry knob G (machine dependent)
SRC page 1: Data entry knob H (machine dependent)
SRC page 2: Data entry knob A (machine dependent.)
SRC page 2: Data entry knob B (machine dependent)
SRC page 2: Data entry knob C (machine dependent)
SRC page 2: Data entry knob D (machine dependent)
SRC page 2: Data entry knob E (machine dependent)
SRC page 2: Data entry knob F (machine dependent)
SRC page 2: Data entry knob G (machine dependent)
SRC page 2: Data entry knob H (machine dependent)
FILTER page 1: Data entry knob A (SRC machine dependent.)
FILTER page 1: Data entry knob B (SRC machine dependent.)
FILTER page 1: Data entry knob C (SRC machine dependent.)
FILTER page 1: Data entry knob D (SRC machine dependent.)
FILTER page 1: Data entry knob E (SRC machine dependent.)
FILTER page 1: Data entry knob F (SRC machine dependent.)
FILTER page 1: Data entry knob G (SRC machine dependent.)
FILTER page 1: Data entry knob H (SRC machine dependent.)
FILTER page 2: Data entry knob A (Not available on Gainer SRC machine’s filter) FILTER page 2: Data entry knob C (Not available on Gainer SRC machine’s filter) FILTER page 2: Data entry knob D (Not available on Gainer SRC machine’s filter) FILTER page 2: Data entry knob E (Not available on Gainer SRC machine’s filter) FILTER page 2: Data entry knob F (Not available on Gainer SRC machine’s filter) FILTER page 2: Data entry knob H (Not available on Gainer SRC machine’s filter) AMP: Attack Time
AMP: Hold Time
AMP: Decay Time
AMP: Sustain Level
AMP: Release Time
AMP: Overdrive
AMP: Pan
AMP: Volume
FX LFO1: Speed (available for FX LFO2)
FX LFO1: Multiplier (available for FX LFO2)
FX LFO1: Fade In/Out (available for FX LFO2)
FX LFO1: Waveform (available for FX LFO2)
FX LFO1: Start Phase (available for FX LFO2)
FX LFO1: Trig Mode (available for FX LFO2)
FX LFO1: Depth (available for FX LFO2)
FX1: Data entry knob A (machine dependent, available for FX LFO 1/2) FX1: Data entry knob B (machine dependent, available for FX LFO 1/2) FX1: Data entry knob C (machine dependent, available for FX LFO 1/2) FX1: Data entry knob D (machine dependent, available for FX LFO 1/2) FX1: Data entry knob E (machine dependent, available for FX LFO 1/2) FX1: Data entry knob F (machine dependent, available for FX LFO 1/2) FX1: Data entry knob G (machine dependent, available for FX LFO 1/2) FX1: Data entry knob H (machine dependent,available for FX LFO 1/2) FX2: Data entry knob A ((machine dependent, available for FX LFO 1/2) FX2: Data entry knob B (machine dependent, available for FX LFO 1/2) FX2: Data entry knob C (machine dependent, available for FX LFO 1/2) FX2: Data entry knob D (machine dependent, available for FX LFO 1/2) FX2: Data entry knob E (machine dependent, available for FX LFO 1/2) FX2: Data entry knob F (machine dependent, available for FX LFO 1/2) FX2: Data entry knob G (machine dependent, available for FX LFO 1/2) FX2: Data entry knob H (machine dependent, available for FX LFO 1/2) Routing: Output (available for FX LFO 1/2)
Routing: Send 1 Amount (available for FX LFO 1/2)
Routing: Send 2 Amount (available for FX LFO 1/2)
Routing: Send 3 Amount (available for FX LFO 1/2)
MIDI TRACKS
META: None
Routing: Output
Routing: Send 1 Amount
Routing: Send 2 Amount
Routing: Send 3 Amount
SRC: Pitch Bend
SRC: Aftertouch
SRC: Mod Wheel
SRC: Breath Controller
FX LFO1: Speed (available for FX LFO2)
FX LFO1: Multiplier (available for FX LFO2)
FX LFO1: Fade In/Out (available for FX LFO2)
FX LFO1: Waveform (available for FX LFO2)
FX LFO1: Start Phase (available for FX LFO2)
FX LFO1: Trig Mode (available for FX LFO2)
FX LFO1: Depth (available for FX LFO2)
FLTR/AMP: CC1–16 Values
BUS TRACKS
META: None
LFO1: Speed (available for LFO2)
LFO1: Multiplier (available for LFO2)
LFO1: Fade In/Out (available for LFO2)
LFO1: Waveform (available for LFO2)
LFO1: Start Phase (available for LFO2)
LFO1: Trig Mode (available for LFO2)
LFO1: Depth (available for LFO2)
FX1: Data entry knob A (machine dependent, available for LFO 1/2) FX1: Data entry knob B (machine dependent, available for LFO 1/2) FX1: Data entry knob C (machine dependent, available for LFO 1/2) FX1: Data entry knob D (machine dependent, available for LFO 1/2) FX1: Data entry knob E (machine dependent, available for LFO 1/2) FX1: Data entry knob F (machine dependent, available for LFO 1/2) FX1: Data entry knob G (machine dependent, available for LFO 1/2) FX1: Data entry knob H (machine dependent, available for LFO 1/2) FX2: Data entry knob A (machine dependent, available for LFO 1/2) FX2: Data entry knob B (machine dependent, available for LFO 1/2) FX2: Data entry knob C (machine dependent, available for LFO 1/2) FX2: Data entry knob D (machine dependent, available for LFO 1/2) FX2: Data entry knob E (machine dependent, available for LFO 1/2) FX2: Data entry knob F (machine dependent, available for LFO 1/2) FX2: Data entry knob G (machine dependent, available for LFO 1/2) FX2: Data entry knob H (machine dependent, available for LFO 1/2) Routing: Output (available for LFO 1/2)
Routing: Send 1 Amount (available for LFO 1/2)
Routing: Send 2 Amount (available for LFO 1/2)
Routing: Send 3 Amount (available for LFO 1/2)
SEND FX TRACKS
META: None
LFO1: Speed (available for LFO2)
LFO1: Multiplier (available for LFO2)
LFO1: Fade In/Out (available for LFO2)
LFO1: Waveform (available for LFO2)
LFO1: Start Phase (available for LFO2)
LFO1: Trig Mode (available for LFO2)
LFO1: Depth (available for LFO2)
FX1: Data entry knob A (machine dependent, available for LFO 1/2) FX1: Data entry knob B (machine dependent, available for LFO 1/2) FX1: Data entry knob C (machine dependent, available for LFO 1/2) FX1: Data entry knob D (machine dependent, available for LFO 1/2) FX1: Data entry knob E (machine dependent, available for LFO 1/2) FX1: Data entry knob F (machine dependent, available for LFO 1/2) FX1: Data entry knob G (machine dependent, available for LFO 1/2) FX1: Data entry knob H (machine dependent, available for LFO 1/2) Routing: Output (available for LFO 1/2)
Routing: Send 1 Amount (available for LFO 1/2)
Routing: Send 2 Amount (available for LFO 1/2)
Routing: Send 3 Amount (available for LFO 1/2)
MIX TRACK
META: None
LFO1: Speed (available for LFO2)
LFO1: Multiplier (available for LFO2)
LFO1: Fade In/Out (available for LFO2)
LFO1: Waveform (available for LFO2)
LFO1: Start Phase (available for LFO2)
LFO1: Trig Mode (available for LFO2)
LFO1: Depth (available for LFO2)
FX: Channel
FX: Data entry knob A (machine dependent, available for LFO 1/2)
FX: Data entry knob B (machine dependent, available for LFO 1/2)
FX: Data entry knob C (machine dependent, available for LFO 1/2)
FX: Data entry knob D (machine dependent, available for LFO 1/2)
FX: Data entry knob E (machine dependent, available for LFO 1/2)
FX: Data entry knob F (machine dependent, available for LFO 1/2)
FX: Data entry knob G (machine dependent, available for LFO 1/2)
FX: Data entry knob H (machine dependent, available for LFO 1/2)
Routing: Output (available for LFO 1/2)
APPENDIX C: KEYBOARD SCALES
APPENDIX C: KEYBOARD SCALES
The following are the selectable scales for the KEYBOARD mode. For more information, please see: “8.5 THE [KEYBOARD]” on page 30,
- CHROMATIC
- IONIAN (MAJOR)
- DORIAN
- PHRYGIAN
- LYDIAN
- MIXOLYDIAN
- AEOLIAN (MINOR)
- LOCRIAN
- PENTATONIC MINOR
- PENTATONIC MAJOR
- MELODIC MINOR
- HARMONIC MINOR
- WHOLE TONE
- BLUES
- COMBO MINOR
- PERSIAN
- IWATO
- IN-SEN
- HIRAJOSHI
- PELOG
- PHRYGIAN DOMINANT
- WHOLE-HALF DIMINISHED
- HALF-WHOLE DIMINISHED
- SPANISH
- MAJOR LOCRIAN
- SUPER LOCRIAN
- DORIAN b2
- LYDIAN AUGMENTED
- LYDIAN DOMINANT
- DOUBLE HARMONIC MAJOR
- LYDIAN #2 #6
- ULTRAPHRYGIAN
- HUNGARIAN MINOR
- ORIENTAL
- IONIAN #2 #5
- LOCRIAN bb3 bb7