6.3 QUICK SCROLLING

6. INTERACTING WITH THE DIGITAKT II > 6.3 QUICK SCROLLING · PDF p. 19 · OS 1.15A
# 6.3 QUICK SCROLLING

6. INTERACTING WITH THE DIGITAKT II
6.2.1 PARAMETER VALUE JUMP
Pressing [FUNC] while editing certain parameters will make the parameter values jump to appropriate
positions. The NOTE parameter, for example jumps between octaves and the delay time jumps between
BPM related tempo settings.
6.2.2  CONTROL ALL
If you press and hold [TRK] and change a parameter setting, this change will affect this parameter in all
the audio tracks in the pattern. Press [NO] before you release [TRK] to revert the parameter changes. .
In the SETUP menu, you have the possibility to select which tracks should be affected by the control all
functionality. For more information, please see “9.8.1 KIT” on page 37.
•	 Control all operations also affects the active track, whether it is selected to be affected
or not.
•	 The control all functionality is not available for the MIDI tracks.
6.2.3 [FUNC] KEY PRESS COMBINATIONS
The standard way to use the [FUNC] key in combination with other keys, is to press and hold [FUNC]
and then make a short press on the second key in the combination.
6.3 QUICK SCROLLING
Scroll through menus using the LEVEL/DATA knob. Quick scrolling is possible on many menus. Press
[FUNC] + the [UP] or [DOWN] keys to move the cursor one menu page.
6.4 COPY, CLEAR, AND PASTE
Copy, clear and paste commands are available in a lot of contexts. Pressing [FUNC] + [RECORD] to copy.
Press [FUNC] + [STOP] to paste. Press [FUNC] + [PLAY] to clear. Paste and clear operations are undone
by repeating the key press combination. Please see the different sections in the manual for more informa
tion on when these commands are available. For more information, please see “17. KEY COMBINATIONS”
on page 88.
The copy clipboard can only hold one item at a time. When you perform a copy command,
the item copied replaces any earlier copied items. For example, you can not have both a
trig and a pattern copied at the same time.
6.5 THE NAMING SCREEN
The naming method is identical for the various naming situations that appear when you save samples, pre
sets, projects et cetera.
The [LEFT] and [RIGHT] arrow keys are used to navigate between the characters. Turning the LEVEL/
DATA knob or pressing the [UP] or [DOWN] arrow keys selects the characters. [FUNC] + [NO] erases
characters. [FUNC] + [YES] inserts space. Press [SETTINGS] to create a random name. Press and hold
[FUNC] to access the Pop-up Naming menu.
6.5.1 POP-UP NAMING
A convenient way of naming is to open a pop-up menu that shows all available letters, symbols, and
digits. Press and hold the [FUNC] key when you are on the NAMING screen to access the Pop-up
Naming screen.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。