9.6 SAVING A PRESET
9. PATTERNS, KITS, PRESETS, AND SAMPLES > 9.6 SAVING A PRESET · PDF p. 35–36 · OS 1.15A
# 9.6 SAVING A PRESET 9. PATTERNS, KITS, PRESETS, AND SAMPLES LOAD TO PATTERN loads the selected kit to the active pattern. COPY TO BANK Copies the selected kits to BANK (A-H) The kit is copied to the first free slot of a specific bank inside the +Drive. SAVE TO HERE saves the active kit to the selected slot. LOAD TO EMPTY loads the selected kit to all empty patterns in the project. RENAME Opens a screen where you can rename the selected kit. DELETE deletes the kit or selected kits. SELECT ALL selects all kits in the list. SELECT UNUSED selects all kits that are not used in any pattern in the project from the pool. The presets are not removed from the +Drive library. Then select DELETE to remove the selected kits from the project’s pool. DESELECT ALL deselects all kits in the list. TOGGLE enables or disables write protection for the selected kits. When a kit is write protected it cannot be overwritten, renamed, tagged or deleted. A write protected kit has a padlock symbol next to its name. The command is only available when you browse the +Drive library. SEND SYSEX sends the selected kit’s presets as SysEx data. 9.4 PLAYING A PRESET Press the [TRIG 1–16] keys to play the presets of the tracks in the active pattern. The [TRIG] keys will brief ly light up when pressed. PLAYING A PRESET WITH AN EXTERNAL MIDI UNIT The presets can also be played using an external MIDI device connected to Digitakt II. The MIDI channels for of each of the tracks can be assigned in the MIDI CHANNELS menu, covered in the section “14.4.3 CHANNELS” on page 79. You can also use an external MIDI unit to play a preset chromatically when you are in KEYBOARD mode. For more information, please see “8.5.1 KEYBOARD MODE” on page 25. 9.5 EDITING A PRESET Select a track for editing by pressing [TRK] + one of the [TRIG 1–16] keys. When editing the settings of the track, any changes made will be stored as part of the active pattern. Adjust the overall volume level of the active audio track with the LEVEL/DATA knob. Edit a preset by adjusting the parameters found on the PARAMETER pages. Access these pages by pressing a [PARAMETER] page key. Use the DATA ENTRY knobs A-H to change the parameters. For more information, please see “11. TRACK PARAMETERS” on page 53. The complete preset, with all its parameter settings and sample, may be copied to another track. Press [TRK] + [TRIG 1–16] + [RECORD], and then press [TRK] + [TRIG 1–16] + [STOP] to paste the preset to the selected track. 9.6 SAVING A PRESET After you edited the parameters of a preset, you can save it to the +Drive. 1. Press [PRESET/KIT] to open the PRESET/KIT menu. 2. Select PRESET > SAVE, and then press [YES]. 3. Turn the LEVEL/DATA knob or use the [UP]/[DOWN] keys to select an empty slot to where you want to save your preset, and then press [YES]. 4. On the NAMING screen, name your preset and then press [YES]. For more information, please see “6.5 THE NAMING SCREEN” on page 19. 9. PATTERNS, KITS, PRESETS, AND SAMPLES 5. On the TAGS screen, use the [ARROW] keys and [YES] key to select the appropriate tags for your preset, and then select <SAVE> and press [YES]. 9.7 ASSIGNING A SAMPLE Any of the 1016 samples loaded to a project may be assigned to a preset on any of the audio tracks. The user samples can be replaced, relocated and otherwise managed in the SAMPLES menu. For more informa tion, please see “13.6 SAMPLES MENU” on page 70. 1. Press [TRK] + [TRIG 1–16] to select a track to assign the sample to. 2. Press [SRC] to open the SOURCE parameter page. 3. Turn DATA ENTRY knob D to bring up a list of the samples in the pool. For more information, please see “13.6.1 LOADING A SAMPLE” on page 71. 4. Turn the knob counter-clockwise to scroll up the list, clockwise to scroll down the list. Press the [TRIG] key of the active track while browsing to listen to the sample currently outlined. 5. Press [YES] to select a sample. Press [NO] to exit the list without selecting a sample. Press [FUNC] + [YES] to go to the selected samples slot in the +Drive. 9.7.1 ASSIGNING A SAMPLE USING THE QUICK ASSIGN METHOD You can also use the Quick assign method to load a sample to a track and the project’s pool. 1. Press [SRC] to open the SOURCE page, and then turn the knob for the SAMP parameter. 2. While the Sample list is open, press [FUNC] + [YES] to open the SAMPLES menu. For more infor mation, please see “13.6 SAMPLES MENU” on page 70. 3. Navigate to the sample you want to load. Any sample can be previewed (played back by the voice of the active track), just highlight it and then press [FUNC] + [YES]. Approximately, ten seconds of the sample can be previewed. 4. Highlight the sample, and then press [YES] to load it directly to the track and the project’s pool. 9.8 THE SETUP MENU Press [FUNC] + [FLTR] to open the SETUP menu. Here you can set a number of track and kit related pa rameters. Use the [UP] and [DOWN] arrow keys to move between the options. Press [YES] to confirm your selection. Press [NO] to exit the menu.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。