← 検索に戻る

12.7 INTERNAL MIXER PAGE 2

12. FX AND MIXER PARAMETERS > 12.7 INTERNAL MIXER PAGE 2 · PDF p. 65–66 · OS 1.15A

# 12.7 INTERNAL MIXER PAGE 2

12. FX AND MIXER PARAMETERS
The Digitakt II compressor
Filter
(HP/LP)
Gain
Reduction
Input
(LR)
Output
Control
Signal
Dry/Wet
Mix
Make up
Gain
Sidechain
Source
Gain
Computer
Dynamics
(Atk/Rel)
SRC
12.6 INTERNAL MIXER PAGE 1
(MIXER PAGE 2)
The INTERNAL MIXER page 1 is where you can access the TRACK LEVEL parameter of track 1–8 (if they
are audio tracks).
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.
12.7 INTERNAL MIXER PAGE 2
(MIXER PAGE 3)
The INTERNAL MIXER page 2 is where you can access the TRACK LEVEL parameter of track 9–16 (if they
are non-MIDI tracks).
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings..

12. FX AND MIXER PARAMETERS
12.8 FX MIXER
(MIXER PAGE 4)
On the FX MIXER page you can set the levels of the send effects and master overdrive.
Press [FUNC] + [MOD] four times to access this parameter page.
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.
CHR
Chorus Mix Volume sets the master volume of the chorus.
DEL
Delay Mix Volume Sets the master volume of the delay.
REV
Reverb Mix Volume sets the master volume of the reverb.
MOVD
Master Overdrive sets overall amount of overdrive for the audio tracks in the kit. Use LEVEL/DATA to
adjust the settings.
12.9 EXTERNAL MIXER
(MIXER PAGE 5)
The EXTERNAL MIXER page contains a number of parameters related to when you use the IN L/R inputs
to process incoming audio.
IN LR
In Level sets the level of the audio from the IN L/R audio input.
DUAL
Dual Mono sets if the inputs are processed as a single stereo input or as two separate mono inputs. Set­
ting this parameter to ON changes the rest of the parameters from controlling both inputs to separate
controls for channel L and R split over two mixer pages The BAL parameters changes to a PAN parame­
ter. Use B to adjust this parameter.
BAL
Balance sets the balance of the audio from the INPUT L and INPUT R inputs in the stereo field.
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.

チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。