15.3 FACTORY RESET
15. STARTUP MENU > 15.3 FACTORY RESET · PDF p. 85 · OS 1.15A
# 15.3 FACTORY RESET 15. STARTUP MENU 15. STARTUP MENU To access this menu, hold down the [FUNC] key while powering up the Digitakt II. From here you can per form a variety of tasks. To choose the different alternatives, press the corresponding [TRIG] key. 15.1 TEST MODE To enter this mode, press the [TRIG 1] key. For testing purposes, a short sound is heard through all outputs of the unit. If you have any trouble with your Digitakt II and suspect it may be due to a hardware problem, perform this self-test. The [UP] and [DOWN] keys can be used to scroll through the test log. A fully functional device should not report any errors. If it does report an error, please contact Elektron support or the retailer that you bought your Digitakt II from. 15.2 EMPTY RESET To perform this operation, press the [TRIG 2] key. All patterns and presets will be erased. The data on the +Drive remains intact. 15.3 FACTORY RESET When performing a factory reset on the Digitakt II, it will overwrite and re-initialize the active RAM project (including all pattern and global data). The +Drive project slot 1 will be overwritten and re-initialized with factory preset patterns, presets and settings. preset bank A will be overwritten with the factory presets. If you wish to keep the active project, remember to save it to a +Drive project slot higher than 1 before you perform a factory reset. To perform a factory reset, press the [TRIG 3] key. 15.4 OS UPGRADE Use this menu option if you for some reason cant upgrade the Digitakt II OS using the standard procedure in the SYSTEM menu. To send the OS file, use our free Elektron Transfer software. The Elektron Transfer can be downloaded from the Elektron website. 1. Download the Digitakt II OS file from the Elektron website. 2. Connect the Digitakt II’s MIDI IN port to the MIDI OUT port of the computer’s MIDI interface. 3. Hold down the [FUNC] key while powering on Digitakt II. This takes you to the STARTUP menu. 4. Press the [TRIG 4] key to enter OS UPGRADE mode. 5. Open the Transfer application on your computer. On the Transfer CONNECTION page, click “go to the SYSEX TRANSFER page”. 6. On the SYSEX TRANSFER page, click “OS Upgrade via device startup menu”, and then follow the on- screen instructions. When the update is done, the Digitakt II will reboot. USB MIDI transfer is not possible when upgrading the OS from the STARTUP menu. 15.5 EXIT Press the [TRIG 5] key to exit the STARTUP menu.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。