19. CREDITS AND CONTACT INFORMATION
19. CREDITS AND CONTACT INFORMATION · PDF p. 92–93 · OS 1.15A
# 19. CREDITS AND CONTACT INFORMATION 19. CREDITS AND CONTACT INFORMATION 19. CREDITS AND CONTACT INFORMATION CREDITS ELEKTRON CREW Lennart Ahlstedt Johannes Algelind Magnus Almberg Christian Alsing Hans Alvarsson Deva Andar Nikolaj Andersson Madeleine Antonsson Anyere Bendrien Andreas Brykt Chloe Corley Johan Damerau Oscar Dragén Magnus Forsell Jennifer Giöbel Birgitta Hedström Mario Adriane Hernandez Tomas Hjalmarsson Thomas Jansson Patrik Johansson Christian Karlsson George Kaplan Åsa Larsson Erik Liakhovets Christer Lindström Joel Lundberg Johannes Mai Enrique Martinez Jimmy Myhrman Viktor Nilsson Jean Michel Pepin Mattias Rickardsson Patrik Rinvall David Smallbone Tizard Che Thomas Jake Widgeon Vladislav Zhukov Erik Ångman FACTORY LIBRARY SAMPLES Adventure Kid (Kristoffer Ekstrand) BlankFor.ms Matt Davies Lisa Nordström Elin Piel Johan Reivén User Friendly Craig Williams The Elektron crew FACTORY PATTERN DESIGN The Elektron crew CONTACT INFORMATION ELEKTRON WEBSITE https://www.elektron.se OFFICE ADDRESS Elektron Music Machines MAV AB Banehagsliden 5 SE-414 51 Gothenburg Sweden APPENDIX A: MACHINES APPENDIX A: MACHINES A machine is a module within the Digitakt II with specific functionality. A machine can be switched out for another machine in the same category. For example different sample playback engines or a selection of filters. Every machine has a specific set of parameters tailored to give you the most relevant and useful sound-shaping possibilities for that particular machine. For more information, please see “5.3.1 AUDIO TRACKS AND MACHINES” on page 17. Use the [UP]/[DOWN] keys to cycle through the parameter group’s pages. You can also press a [PARAM ETER] key repeatedly to cycle trough the parameter pages in that group. Press and hold a [PARAMETER] key to see the values for all parameters on that page. A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK 1. Press [FUNC] + [SRC] to open the MACHINE menu. 2. Use the [LEFT]/[RIGHT] keys to navigate to the desired machine category. 3. Use the [UP]/[DOWN] keys to select machine, and then press [YES] to assign the selected machine to the track. The rest of this appendix lists the machine-specific parameters on the SRC and FLTR pages. The selected machine determines the parameters available. SRC page 2 contains the same parameters as on page 1 but with a view of the sample waveform. For more information, please see “11.4 SRC PAGE” on page 55. A.2 SRC MACHINES The SRC machines are sound engines that uses a particular subset of the functionality of the sample play back engine. In this section you also find the MIDI machine that lets you control external, MIDI equipped, gear. For more information, please see “5.3.2 MIDI TRACKS” on page 17. You can assign any SRC ma chine to any track. A.2.1 ONESHOT The Oneshot machine is the default machine and plays the sample linearly (forward, reversed, or looped). Press [SRC] to access this parameter page and to toggle between page 1 and page 2. TUNE Tune sets the pitch of the sample. The knob works in a bipolar fashion, and a value of 0 leaves the pitch unchanged. The range is +/- 5 octaves. Press and hold [FUNC], and then turn the DATA ENTRY knob to snap parameter values to full octaves. Press and turn the DATA ENTRY knob to snap parame ter values to semitones. PLAY Play Mode sets the play mode of the sample. It controls how the sample will be played back when it is trigged.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。