3.1 FRONT PANEL
3. PANEL LAYOUT AND CONNECTORS > 3.1 FRONT PANEL · PDF 第 12–14 · OS 1.15A
# 3.1 FRONT PANEL 3. PANEL LAYOUT AND CONNECTORS 3. PANEL LAYOUT AND CONNECTORS 3.1 FRONT PANEL 1. MAIN VOLUME sets the volume for the main outputs and the headphones output. 2. [PRESET/KIT] opens PRESET/KIT menu where you manage the presets and kits The secondary func tion accesses the PERFORM KIT mode. 3. [SETTINGS] contains the management of projects, MIDI configuration, and the System settings. The secondary function saves the current project. 4. [SAMPLING] opens the SAMPLING menu, where you perform the sampling. The secondary function opens the SAMPLES menu. 5. [TEMPO] opens the TEMPO menu, where you can adjust the global/pattern tempo and also adjust the swing. Here you also find the settings for the metronome. The secondary function makes it possible to tap the tempo. 6. [NO] key. Used for exiting an active menu, backing one step and negating. The secondary function is to temporary reload the active pattern. 7. [YES] key. Used for entering sub-menus, selecting and confirming. The secondary function is to tempo rary save the active pattern. 8. DATA ENTRY knobs A-H. Used for setting parameter values. Press and turn the knobs to change values in larger increments. 9. [PARAMETER] keys access the PARAMETER pages of the active track. The color of the keys indicates if the page is active (red/orange) or inactive (off). • [TRIG PARAMETERS] accesses parameters such as NOTE, VELOCITY, and other trig related param eters. The secondary function accesses the QUANTIZE menu. • [SRC] takes you to the SOURCE page that has the parameters for the selected SRC machine on audio tracks. For MIDI tracks this page has parameters such as CHANNEL, PROGRAM, and AFTERTOUCH. The secondary function accesses the MACHINE menu. 3. PANEL LAYOUT AND CONNECTORS • [FLTR] accesses the FILTER page. Here are the parameters for the FLTR machine for the audio tracks. On MIDI tracks you find the CC value settings and CC select settings for track 1–8 here. The secondary function accesses the SETUP menu. • [AMP] takes you to the AMP page, where you find parameters for the amplitude envelope and effect sends. On MIDI tracks you find the CC value settings and CC select settings for track 9–16 here. The secondary function accesses the SEQUENCER menu where you find the parameters for the euclidean sequencer. • [FX] takes you to the FX pages, where you find parameters for the bit reduction, overdrive, sample rate reduction, and effect sends levels. The secondary page accesses the parameters for the send effects. • [MOD] accesses the LFO parameters for the active track. The secondary function accesses the MIXER pages. 10. The <PATTERN PAGE> LEDs indicate how many pattern pages the active pattern consists of and which pattern page is currently active. The LED flashes on the pattern page currently playing. 11. The [ARROW] keys. Used for navigation and for setting some parameter values. Separately, they are called [UP], [DOWN], [LEFT], and [RIGHT]. 12. [PAGE] selects the It is possible to copy, clear and paste one or several patterns without leaving the active pattern. First press [PTN], then press [TRIG] + [RECORD] to select the pattern you wish to copy and copy it. Then press [TRIG] + [STOP] to paste the copied pattern to where you wish to paste it. Press [TRIG] + [PLAY] to clear the selected pattern. page, The secondary function accesses the PAGE SETUP menu. This key also activates FILL mode. 13. [TRIG] keys are used for entering or removing sequencer trigs, and parameter locks, in combination with the DATA ENTRY knobs. They are also used to select a track, bank, pattern, and song in combina tion with the [TRK], [PTN], and [SONG] keys. The [TRIG] keys are also used as a keyboard in KEY BOARD mode. The secondary function is to Quick Mute tracks. The [TRIG] keys lights indicate trigs on the sequencer by lit red keys, while flashing red or yellow keys indicates parameter locks, in GRID RECORDING and STEP RECORDING mode. When a pattern is play ing, or when LIVE RECORDING is enabled, a light “runs” along the 16 steps of the sequencer across all (up to eight) pages at the set tempo. 14. [SONG] selects song 1–16 in combination with the [TRIG 1–16] keys. The secondary function accesses the Song edit screen. 15. [PTN] selects the bank and pattern in combination with the [LEFT]/[RIGHT] and [TRIG 1–16] keys. The secondary function opens the Bank selection. 16. [TRK] key. Press [TRK] + one of the [TRIG] keys to select a track for editing. The secondary function accesses the MUTE mode. 17. [STOP] stops playback. The secondary function is the paste operation. 18. [PLAY] starts the sequencer playback. Pressing [PLAY] a second time pauses playback. The secondary function is the clear operation. 19. [RECORD] key. Activates/deactivates GRID RECORDING mode. Press [RECORD] + [PLAY], to activate LIVE RECORDING mode. Press [RECORD] + [STOP], to activate STEP RECORDING mode. The sec ondary function is the copy operation. 20. [KEYBOARD] toggles KEYBOARD mode on/off. The secondary function opens the KEYBOARD SETUP menu where you can view and edit settings such as scale, root note, and keyboard fold. 21. [FUNC] key. Press, hold and press another key to access the secondary function of that key. The sec ondary functions are written in orange on the Digitakt II front panel. 22. LEVEL/DATA sets the overall volume level of the active track. It is also used for setting parameters and scrolling through lists. The secondary function opens the PRESET MANAGER. This knob is also used to open the PRESET POOL when adding preset locks. 23. Screen. 3. PANEL LAYOUT AND CONNECTORS 3.2 REAR CONNECTORS 1. POWER, Switch for turning the unit on and off. 2. DC In, Input for power supply. Use the included PSU-3c power adapter, connected to a power outlet. 3. USB, For connecting the unit to a computer and for MIDI-control. Use the included A to B USB 2.0 con nector cable to connect to a computer host. 4. MIDI THRU/SYNC B, Forwards data from MIDI IN. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect another MIDI device in the chain12 dB/octave 5. MIDI OUT/SYNC A, MIDI data output. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external MIDI device. 6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an external MIDI device. 7. IN L/R, Audio inputs used for external sources for sampling or audio processing. Use either a 1/4” (Tip/ Ring/Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 8. OUT L/R, Main audio outputs. Use either a 1/4” (Tip/Ring/Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 9. HEADPHONES, Audio output for stereo headphones. Use 1/4” (Tip/Ring/Sleeve) phone plug. 3.3 SETTING UP AND STARTING THE DIGITAKT II Make sure you place the Digitakt II on a stable support, such as a sturdy table, with sufficient space for the cables. Make sure to switch off all devices before you connect the Digitakt II to other devices. 1. Plug the supplied DC adapter to a power outlet and connect the small plug to the 12 V DC In on the Digitakt II. 2. Connect OUT L/R from the Digitakt II to your mixer or amplifier. 3. To control the Digitakt II from a computer, connect a USB cable between the computer and the USB connector of the Digitakt II. 4. If you want to use MIDI to control the Digitakt II, connect the MIDI OUT port of the device you wish to send data from to the MIDI IN port of the Digitakt II. The MIDI THRU port duplicates the data arriving at the MIDI IN port, so it can be used for chaining MIDI units together. Connect the MIDI OUT port of the Digitakt II to the MIDI IN port of the of the device you want to control if you want to use Digitakt II to control other devices using MIDI. 5. If you want to sample or process audio from external sources, connect the audio source to IN L/R or via USB (sampling only). 6. Switch on all units. Switch on the Digitakt II by pressing the Power switch located at the back of the unit.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。