3.2 REAR CONNECTORS
3. PANEL LAYOUT AND CONNECTORS > 3.2 REAR CONNECTORS · PDF 第 14 · OS 1.15A
# 3.2 REAR CONNECTORS 3. PANEL LAYOUT AND CONNECTORS 3.2 REAR CONNECTORS 1. POWER, Switch for turning the unit on and off. 2. DC In, Input for power supply. Use the included PSU-3c power adapter, connected to a power outlet. 3. USB, For connecting the unit to a computer and for MIDI-control. Use the included A to B USB 2.0 con nector cable to connect to a computer host. 4. MIDI THRU/SYNC B, Forwards data from MIDI IN. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect another MIDI device in the chain12 dB/octave 5. MIDI OUT/SYNC A, MIDI data output. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external MIDI device. 6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an external MIDI device. 7. IN L/R, Audio inputs used for external sources for sampling or audio processing. Use either a 1/4” (Tip/ Ring/Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 8. OUT L/R, Main audio outputs. Use either a 1/4” (Tip/Ring/Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 9. HEADPHONES, Audio output for stereo headphones. Use 1/4” (Tip/Ring/Sleeve) phone plug. 3.3 SETTING UP AND STARTING THE DIGITAKT II Make sure you place the Digitakt II on a stable support, such as a sturdy table, with sufficient space for the cables. Make sure to switch off all devices before you connect the Digitakt II to other devices. 1. Plug the supplied DC adapter to a power outlet and connect the small plug to the 12 V DC In on the Digitakt II. 2. Connect OUT L/R from the Digitakt II to your mixer or amplifier. 3. To control the Digitakt II from a computer, connect a USB cable between the computer and the USB connector of the Digitakt II. 4. If you want to use MIDI to control the Digitakt II, connect the MIDI OUT port of the device you wish to send data from to the MIDI IN port of the Digitakt II. The MIDI THRU port duplicates the data arriving at the MIDI IN port, so it can be used for chaining MIDI units together. Connect the MIDI OUT port of the Digitakt II to the MIDI IN port of the of the device you want to control if you want to use Digitakt II to control other devices using MIDI. 5. If you want to sample or process audio from external sources, connect the audio source to IN L/R or via USB (sampling only). 6. Switch on all units. Switch on the Digitakt II by pressing the Power switch located at the back of the unit.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。