6.5 THE NAMING SCREEN
6. INTERACTING WITH THE DIGITAKT II > 6.5 THE NAMING SCREEN · PDF 第 19–20 · OS 1.15A
# 6.5 THE NAMING SCREEN 6. INTERACTING WITH THE DIGITAKT II 6.2.1 PARAMETER VALUE JUMP Pressing [FUNC] while editing certain parameters will make the parameter values jump to appropriate positions. The NOTE parameter, for example jumps between octaves and the delay time jumps between BPM related tempo settings. 6.2.2 CONTROL ALL If you press and hold [TRK] and change a parameter setting, this change will affect this parameter in all the audio tracks in the pattern. Press [NO] before you release [TRK] to revert the parameter changes. . In the SETUP menu, you have the possibility to select which tracks should be affected by the control all functionality. For more information, please see “9.8.1 KIT” on page 37. • Control all operations also affects the active track, whether it is selected to be affected or not. • The control all functionality is not available for the MIDI tracks. 6.2.3 [FUNC] KEY PRESS COMBINATIONS The standard way to use the [FUNC] key in combination with other keys, is to press and hold [FUNC] and then make a short press on the second key in the combination. 6.3 QUICK SCROLLING Scroll through menus using the LEVEL/DATA knob. Quick scrolling is possible on many menus. Press [FUNC] + the [UP] or [DOWN] keys to move the cursor one menu page. 6.4 COPY, CLEAR, AND PASTE Copy, clear and paste commands are available in a lot of contexts. Pressing [FUNC] + [RECORD] to copy. Press [FUNC] + [STOP] to paste. Press [FUNC] + [PLAY] to clear. Paste and clear operations are undone by repeating the key press combination. Please see the different sections in the manual for more informa tion on when these commands are available. For more information, please see “17. KEY COMBINATIONS” on page 88. The copy clipboard can only hold one item at a time. When you perform a copy command, the item copied replaces any earlier copied items. For example, you can not have both a trig and a pattern copied at the same time. 6.5 THE NAMING SCREEN The naming method is identical for the various naming situations that appear when you save samples, pre sets, projects et cetera. The [LEFT] and [RIGHT] arrow keys are used to navigate between the characters. Turning the LEVEL/ DATA knob or pressing the [UP] or [DOWN] arrow keys selects the characters. [FUNC] + [NO] erases characters. [FUNC] + [YES] inserts space. Press [SETTINGS] to create a random name. Press and hold [FUNC] to access the Pop-up Naming menu. 6.5.1 POP-UP NAMING A convenient way of naming is to open a pop-up menu that shows all available letters, symbols, and digits. Press and hold the [FUNC] key when you are on the NAMING screen to access the Pop-up Naming screen. 6. INTERACTING WITH THE DIGITAKT II Keep [FUNC] pressed and use the [ARROW] keys to highlight the character you want to insert. Once there, release [FUNC] to add the character. Copy, paste, and clear commands are available on the NAMING screen. 6.6 OVERBRIDGE The Overbridge software enables a tight integration between the Digitakt II and a computer DAW software. When using Overbridge, the user interface for the Digitakt II presents itself as a plug-in window in your DAW. Access, edit and automate parameters for sound shaping on screen. Always find your device preset parameters in the same state as you left them when you return to your DAW project, with the useful total recall functionality. Read more about Overbridge use and availability on the Elektron website: https://www.elektron.se/overbridge/ 6.7 CLASS COMPLIANT DEVICE The Digitakt II is a class compliant device (also known as plug-and-play). It means it does not require any extra drivers to connect to your computer or other USB class compliant hosts. The Digitakt II can, therefore, stream audio and MIDI directly over USB to and from supported computers/ phones/tablets. It opens up several exciting possibilities of what you can do with your device, for example, record audio from your device directly over USB in your DAW. For more information, please see “14.8.1 USB CONFIG” on page 83. 6.8 BACKING UP THE DIGITAKT II It is always recommended to make regular backups of your data. Backups are also a convenient way to share your projects, Presets, and samples with other users. To make backups and transfer files to and from your Elektron device, you should use Transfer, a free application that you can download from the Elektron site https://www.elektron.se/support. The application is available for both Windows and macOS. 6.8.1 BACKING UP PROJECTS, PRESETS AND SAMPLES You can backup your projects, presets and samples from your Elektron device to a computer. Here is the general procedure for how to back up your device: 1. Connect the Elektron device to the computer via USB. 2. Open the Transfer application on your computer, and then select the USB MIDI port(s) for your device on the CONNECTION page, and then click “CONNECT” next to your device under AVAIL ABLE DEVICES. 3. In Transfer, click the EXPLORE tab to open the EXPLORE page. 4. On the EXPLORE page top left side of the drop-down menu, make sure “MY COMPUTER” is se lected. 5. On the top right side, in the drop-down menu, select the type of file you want to transfer. 6. In the window on the right, navigate to the files or folders you want to transfer 7. Drag and drop the files or folders to your preferred location under “MY COMPUTER.” 6.8.2 TRANSFERRING BACKED UP FILES TO YOUR ELEKTRON DEVICE Use the EXPLORE page in Transfer to transfer previously backed up files to your Elektron device from a computer.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。