13.4 SAMPLE PLAYBACK
13. SAMPLING > 13.4 SAMPLE PLAYBACK · PDF 第 70 · OS 1.15A
# 13.4 SAMPLE PLAYBACK 13. SAMPLING 3. Press [RIGHT], to open the SAMPLE ACTION menu and then select LOAD TO TRK and press [YES] to load the sample to the active track. For more information, please see “13.6 SAMPLES MENU” on page 70. 13.4 SAMPLE PLAYBACK Once the sample is assigned to a track, it can be triggered either by the sequencer or manually by pressing a [TRIG] key. You also have the ability to set the samples play mode and edit what portion of the sample is played. 1. Press [SRC] to access the SOURCE page. 2. Set the TUNE of the sample. 3. Set the PLAY MODE behavior of the sample. • REVERSE The sample will be played back in reverse once every time it is trigged. • REVERSE LOOP The sample will loop continuously in reverse between Loop Position and Length. How long it will loop for is set with the LEN parameter on the TRIG page. The loop time is also con strained by the AMP page envelope parameter settings HLD and DEC. • FORWARD LOOP The sample will start from the start position and then loop continuously between Loop Position and Length. How long it will loop for is set with the LEN parameter on the TRIG page. The loop time is also constrained by the AMP page envelope parameters HLD and DEC. • FORWARD The sample will be played back once every time it is trigged. 4. Use DATA ENTRY knobs E, F, and G to set the STRT, LEN, and LOOP parameters which define what portion of the sample is played. Press [SRC] twice to access SRC page 2, in order to more easily see these settings using the sample waveform. • STRT Start sets the start position for the playback of the sample. • LEN Length sets the length of the playback of the sample. Start + Length effectively defines the end point of the portion of the sample that is played. • LOOP Loop Position sets the position in the sample to where playback will return after reaching the Length Position (defined by STRT + LEN) if PLAY MODE is set to FORWARD LOOP or REVERSE LOOP. The sample then loops between the end of LEN, and LOOP. For more information, please see “11.4 SRC PAGE” on page 55. 13.6 SAMPLES MENU Press [FUNC] + [SAMPLING] to open the SAMPLES menu. Use the [UP]/[DOWN] keys to select if you want to view the +Drive or the RAM storage. Press [YES] to open the selected storage space. Here you can manage your samples. Initially, here are two directories FACTORY and INCOMING. A wide array of factory samples are available in the write protected FACTORY directory. The INCOMING directory
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。