14.6 AUDIO ROUTING
14. SETTINGS MENU > 14.6 AUDIO ROUTING · PDF 第 80–81 · OS 1.15A
# 14.6 AUDIO ROUTING 14. SETTINGS MENU The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data send alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be sent. Press [YES] to initiate the SysEx send procedure. PROJECT will send the active project (settings, patterns, presets in the pool). PATTERN will send the selected pattern. • Backing up your data regularly is important! • Before initiating a SysEx send, first, make sure the receiving device is listening for data to be sent. 14.5.2 SYSEX RECEIVE Here projects, patterns, and presets can be received from an external device. Digitakt II is continuously listening for SysEx data so you can at any time send backed up projects or patterns to the device. The column to the left selects what will be received. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data receive alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be received. Press [YES] to initiate the SysEx receive procedure. The Digitakt II starts listening to incoming data. Press [NO] to stop listening. PATTERN will store a received pattern to the selected pattern slot. PRESETS will store a received preset to the selected slot of the +Drive library. The option ANY WHERE will place the preset in the first free slot available. To the right of the bank indication, the amount of free slots can be seen. 14.6 AUDIO ROUTING Here you find number of audio routing options that affects the Digitakt II on a global level. 14.6.1 TO MAIN Use this option to customize which of the 16 tracks, 3 effects (Delay, Reverb, Chorus), and inputs that will send audio to the MAIN OUT outputs. Press [YES] then use [UP]/[DOWN] to switch between the setup 14. SETTINGS MENU pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to main. Green keys signal send to main. Unlit keys signal do not send to main. 14.6.2 TO FX Use this option to customize which of the 16 tracks, 2 effects (Delay, Chorus), and inputs that will send audio to the effects. Press [YES] then use [UP]/[DOWN] to switch between the setup pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to FX. Green keys signal send to FX. Unlit keys signal do not send to main. 14.6.3 USB IN Sets where the incoming audio from Overbridge or a class compliant device is routed to in the Digitakt II’s signal path. This parameter is only available when USB CONFIG is set to USB AUDIO/MIDI. For more information, please see “14.8.1 USB CONFIG” on page 83. MAIN the incoming audio is routed to the Digitakt II’s main outputs. OFF No audio is routed from USB to the Digitakt II. 14.6.4 USB OUT Sets from where in the Digitakt II’s signal path, the outgoing audio is routed to Overbridge or a class compliant device. This parameter is only available when USB CONFIG is set to USB AUDIO/MIDI. For more information, please see “14.8.1 USB CONFIG” on page 83. MAIN the outgoing audio is routed from the Digitakt II’s Main out at the end of the signal path. L:T1–16/R:T1–16 the outgoing audio is routed from the selected track(s) Press a [TRIG] key twice to select a single track as a stereo source. The selected track’s [TRIG] key lights up white. Press first one [TRIG] key and then another to select two separate tracks as sources. The selected tracks’ [TRIG] keys lights up blue for left channel and red for right channel. The audio from each track is then summed to mono, routed out and sent separately on left and right channel. EXT the outgoing audio is routed straight from the Digitakt II’s audio inputs IN L/R to Overbridge or a class compliant device. OFF no audio is sent to Overbridge or a class compliant device. 14.6.5 INT TO MAIN Sets if Digitakt II sends internal audio to the MAIN OUT and HEADPHONES OUT or not when used with Overbridge or as a class compliant audio device. OFF No sound is sent to main out. ON preset is always sent to main out. 14.6.6 USB TO MAIN [dB] Sets the amount of amplification of the sound that is streamed over USB to the Digitakt II main out when used with Overbridge or as a class compliant audio device. (0 dB–+18 dB) 14.6.7 PRE/POST FADER Sets if audio over USB should be pre or post the track level setting. • Audio from the TRACK OUTPUTS is always without any effects. • Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs in Overbridge. 14.7 PERSONALIZE Here you can customize a number of settings to fit you personal preferences.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。