16.2 DIGITAKT II WITH A SMART PHONE
16. SETUP EXAMPLES > 16.2 DIGITAKT II WITH A SMART PHONE · PDF 第 86–87 · OS 1.15A
# 16.2 DIGITAKT II WITH A SMART PHONE 16. SETUP EXAMPLES 16. SETUP EXAMPLES The Digitakt II likes to play with other machines. Whether it uses its ability to sync and play with legacy ma chines, samples from your smart phone or controls other synthesizers: Digitakt II gets along with other gear. 16.1 DIGITAKT II WITH A MONOPHONIC BASS MACHINE The DIN sync capabilities of the Digitakt II allows you to use gear from yesteryear. In this example, a legacy monophonic bass machine is used alongside the Digitakt II. The Digitakt II can stop, start and control the tempo of the bass machine. 1. Prepare a bassline pattern on the bass machine. 2. Connect the output of the bass machine to the mixer using a Mono jack 6.3 mm male cable. 3. Connect the Digitakt II audio outputs to the mixer using 2 x Mono or Stereo jack 6.3 mm male cables. 4. Use a DIN connector cable to connect the MIDI OUT of the Digitakt II to the SYNC IN of the bass machine. 5. On the Digitakt II, press [SETTINGS], and then navigate to MIDI CONFIG > PORT CONFIG and set OUT PORT CONFIG to DIN24. 6. Press [PLAY] on the Digitakt II. 16.2 DIGITAKT II WITH A SMART PHONE 16. SETUP EXAMPLES Digitakt II can make use of its class compliant audio and MIDI functionality together with your computer, smart phone or tablet. You can let Digitakt II sample audio from the phone or maybe use it the other way around and record audio from the Digitakt II on your phone. You can use your phone as an effect processor for the Digitakt II, and among many other things. In this example, we use Digitakt II to sample audio from the phone. 1. Use a cable or adapter to connect your phone´s data connector jack (Lightning, USB-C or other) to the Digitakt II’s USB-B jack. 2. Navigate to SETTINGS > SYSTEM > USB CONFIG and select USB AUDIO/MIDI. 3. Press [SAMPLING] to access the SAMPLING menu and then use DATA ENTRY knob A to set SOURCE to USB L R. 4. You are now ready to start sampling audio from your smart phone. For more information about the sampling process, please see “13. SAMPLING” on page 68. 16.3 CONTROLLING A SYNTHESIZER USING THE MIDI TRACKS Digitakt II has extensive capabilities to use its sequencer’s MIDI tracks to control other MIDI-equipped synthesizers. 1. Use a standard MIDI cable to connect the Digitakt II MIDI OUT jack with the synthesizer’s MIDI IN jack. 2. On the Digitakt II, press [SETTINGS], and then navigate to MIDI CONFIG > PORT CONFIG and set OUT PORT FUNC to MIDI. 3. In the same menu set OUTPUT to MIDI. 4. On the main screen, press [TRK] + [TRIG 1-16] to select a track that uses a MIDI SRC machine. 5. Press [SRC] and use the CHAN parameter to select a MIDI channel that the track will output its data to. 6. Make sure to set your synthesizer to receive MIDI input in a way that corresponds to the settings you made in the Digitakt II. You are now ready to use the Digitakt II sequencer to control your synthesizer. For more information about using the Digitakt II sequencer, please see “10. THE SEQUENCER” on page 40
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。