19. CREDITS AND CONTACT INFORMATION

CREDITS

ELEKTRON CREW

Lennart Ahlstedt

Johannes Algelind

Magnus Almberg

Christian Alsing

Hans Alvarsson

Deva Andar

Nikolaj Andersson

Madeleine Antonsson

Anyere Bendrien

Andreas Brykt

Chloe Corley

Johan Damerau

Oscar Dragén

Magnus Forsell

Jennifer Giöbel

Birgitta Hedström

Mario Adriane Hernandez

Tomas Hjalmarsson

Thomas Jansson

Patrik Johansson

Christian Karlsson

George Kaplan

Åsa Larsson

Erik Liakhovets

Christer Lindström

Joel Lundberg

Johannes Mai

Enrique Martinez

Jimmy Myhrman

Viktor Nilsson

Jean Michel Pepin

Mattias Rickardsson

Patrik Rinvall

David Smallbone Tizard

Che Thomas

Jake Widgeon

Vladislav Zhukov

Erik Ångman

FACTORY LIBRARY SAMPLES

Adventure Kid (Kristoffer Ekstrand)

BlankFor.ms Matt Davies

Lisa Nordström

Elin Piel

Johan Reivén

User Friendly

Craig Williams

The Elektron crew

FACTORY PATTERN DESIGN

The Elektron crew

CONTACT INFORMATION

ELEKTRON WEBSITE

https://www.elektron.se OFFICE ADDRESS

Elektron Music Machines MAV AB

Banehagsliden 5

SE-414 51 Gothenburg

Sweden APPENDIX A: MACHINES

APPENDIX A: MACHINES

A machine is a module within the Digitakt II with specific functionality. A machine can be switched out for another machine in the same category. For example different sample playback engines or a selection of filters. Every machine has a specific set of parameters tailored to give you the most relevant and useful sound-shaping possibilities for that particular machine. For more information, please see “5.3.1 AUDIO TRACKS AND MACHINES” on page 17.

Use the [UP]/[DOWN] keys to cycle through the parameter group’s pages. You can also press a [PARAMETER] key repeatedly to cycle trough the parameter pages in that group. Press and hold a [PARAMETER] key to see the values for all parameters on that page.

A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK

1. Press [FUNC] + [SRC] to open the MACHINE menu.
2. Use the [LEFT]/[RIGHT] keys to navigate to the desired machine category.
3. Use the [UP]/[DOWN] keys to select machine, and then press [YES] to assign the selected machine to the track.

The rest of this appendix lists the machine-specific parameters on the SRC and FLTR pages. The selected machine determines the parameters available. SRC page 2 contains the same parameters as on page 1 but with a view of the sample waveform. For more information, please see “11.4 SRC PAGE” on page 55.

A.2 SRC MACHINES

The SRC machines are sound engines that uses a particular subset of the functionality of the sample playback engine. In this section you also find the MIDI machine that lets you control external, MIDI equipped, gear. For more information, please see “5.3.2 MIDI TRACKS” on page 17. You can assign any SRC machine to any track.

A.2.1 ONESHOT

The Oneshot machine is the default machine and plays the sample linearly (forward, reversed, or looped). Press [SRC] to access this parameter page and to toggle between page 1 and page 2.

TUNE

Tune sets the pitch of the sample. The knob works in a bipolar fashion, and a value of 0 leaves the pitch unchanged. The range is +/- 5 octaves. Press and hold [FUNC], and then turn the DATA ENTRY knob to snap parameter values to full octaves. Press and turn the DATA ENTRY knob to snap parameter values to semitones.

PLAY

Play Mode sets the play mode of the sample. It controls how the sample will be played back when it is trigged.